|
|
|
|
|||
|
|
|
OPERATION: Gravity fed on an incline, the product is
controlled by adjustable side guides positioned on the infeed section and on
the discharge side. Length is controlled by an adjustable stop gate. Product
hits the stop gate and actuates a cycling switch. The air-operated sealing
jaw descends affecting the seal. Impulse circuit then activates trim wire to
separate remaining end of bag. A mechanically assisted "positive scrap
stripper," in addition to the standard air-jet scrap blow-away system
assures complete scrap removal efficiency. Jaw ascends to "up"
position, ready for next cycle. Machine can seal up to 40 packages per
minute. FEATURES: Manufactured with all solid-state circuitry, the
DS-18 is virtually maintenance-free. A ceramic-coated sealing bar insulates
the circuit, thus preventing short-outs. Angle of incline is adjustable
vertically to position seal at one-half the height of the product. All
sealers are equipped with a hood and electric interlock as a safety feature. TYPE OF SEAL: Hot jaw seal with impulse element for trim (simple
knob adjustment provides for straight impulse sealing if required)
temperature controller maintains the sealing bar at the desired temperature
regardless of voltage or environmental fluctuations. Impulse element bisects
weld. All units equipped with accurate control of temperature, pressure and
dwell time to insure optimum results. OPTIONAL ATTACHMENTS: Available with flying knife cut-off for laminated
pouch sealing, air operated spankers to compress fluffy or bulky items,
vacuum pump for vacuum and gas-flush packaging. Models available up to
36" wide. Please |
|
||
