|
|
|
|
|||
|
|
|
OPERATION: Gravity fed on an incline; the product is
controlled by adjustable side guides positioned on the infeed section and on
the discharge side. An adjustable stop gate controls length. Product hits the
stop gate and actuates a cycling switch. The air-operated sealing jaw
descends affecting the seal. Impulse circuit then activates trim wire to
separate remaining end of bag. A mechanically assisted "positive scrap
stripper," in addition to the standard air-jet scrap blow-away system
assures complete scrap removal efficiency. Jaw ascends to "up"
position, ready for next cycle. Machine can produce up to 40 packages per
minute. FEATURES Manufactured with all solid-state circuitry, the
DS-10 is virtually maintenance-free. A ceramic-coated sealing bar insulates
the circuit, thus preventing short-outs. Angle of incline is adjustable
vertically to position seal at one-half the height of the product. All
sealers are equipped with a hood and electric interlock as a safety feature. TYPE OF SEAL Hot jaw seal with impulse element for trim (simple
knob adjustment provides for straight impulse sealing if desired temperature
controller maintains the sealing bar at the desired temperature regardless of
voltage or environmental fluctuations. Impulse element bisects weld. All
units equipped with accurate controls of temperature, pressure and dwell time
to insure optimum results. OPTIONAL ATTACHMENTS Air operated spankers are available to compress
fluffy or bulky items. Vacuum pump for vacuum and gas-flush packaging. Model
DS-14 produces seals on bag's width up to 14". Also see DS-18. Please |
|
||
